Perbaikan Lambung Kapal KM. Harima PT. CSFI-Cilacap
Abstract
The purpose of a ship is for the transportation or transfer of goods, but what is no less important is safety. Therefore checking every part is very important. Repair of the hull is mandatory because damage to the hull can result in imbalance in ship operations and even ship accidents. This study aims to describe the repair of the ship's hull on the KM. Harima PT. CSFI Cilacap. The study used a survey method by observing and being directly involved in the ship repair process. Improvements that are in accordance with the research objectives are repairing the ship's hull KM Harima. The results show that ship repair is carried out through checking, welding, welding, or painting.
Downloads
References
Ariany, Z. (2014). Kajian Reparasi Pengecatan Pada Lambung Kapal (Studi Kasus Km. Kirana 3). Teknik, 35(1), 27–32. https://doi.org/10.14710/teknik.v35i1.6822
Haryadi, G. D. (2007). Analisa Kerusakan Hasil Pengelasan Bawah Air Pada Lambung Kapal Dengan Bahan Elektroda Rb 26 Terseloti. Analisa Kerusakan Hasil Pengelasan Bawah Air Pada Lambung Kapal Dengan Bahan Elektroda Rb 26 Terseloti, 9(1), 31–41. Rotasi, https://doi.org/10.14710/rotasi.9.1.31-41
Hendrawan, A. (2019a). Analisa Indikator Keselamatan Pelayaran Pada Kapal Niaga. Saintara, 3(2)
Hendrawan, A. (2019b). Analisa Penyebab Keausan Poros Baling Baling Kapal. Saintara, 4(1)
Hendrawan, A. (2020a). Analisa Tingkat Kebisingan Kamar Mesin Pada Kapal. Wijayakusuma Prosiding Seminar Nasional: Jaringan Penelitian (JARLIT) Cilacap “Menuju Cilacap 4.C (Creativity, Critical Thingking, Communication And Colaboration, 10–15
Hendrawan, A. (2020b). Pengaruh Turbocharger terhadap Daya Mesin Induk KN. Prajapati. Majalah Ilmiah Gema Maritim, 22(1), 44–48. https://doi.org/10.37612/gema-maritim.v22i1.50
Hendrawan, A. (2020c). Program Kesehatan dan Keselamatan Kerja di Atas Kapal. Jurnal Sains Teknologi Transportasi Maritim, 2(1), 1–10.
Hendrawan, A., Ajun, R., Siswadi, & Supari. (2021). Penyebab Kerusakan Electro Motor Oil Max Pump Pada Mesin Induk Di KM . Dharma Kartika IX. Saintara, 5(2), 28–35
Hendrawan, A., & Hendrawan, A. K. (2020). Analisa Kebisingan di Bengkel Kerja Akademi Maritim Nusantara. Saintara, 5(1), 1–5
Hendrawan, A., Lusiani, L., & Aprilian, R. (2020). Sandblasting pada kapal mv. berlian indah, Saintara, 4(2), 26–33
Marasabessy, A., Nur, I., & Sudjasta, B. (2014). Metode Pemeliharaan Yang Tepat Lambung Kapal Type Patroli V30 Berbahan Fiberglass. Bina Widya, 25(2), 57–65
Satoto, S. W., P, N. A., & Saputra, H. (2013). Perbandingan Teknis Ukuran Utama Dan Hambatan Kapal Pada Lambung Kapal Wisata Pulau Petong. Jurnal Teknologi Dan Riset Terapan (JATRA), 1(43), 1–10
Suryani, D., Pratiwi, A. Y., Sunarji, & Hendrawan, A. (2018). Peran Syahbandar Dalam Keselamatan Pelayaran. Jurnal Saintara, 2(2).
Tarwaka. (2009). Keselamatan dan Kesehatan Kerja. Harapan Press. https://doi.org/10.19641/j.cnki.42-1290/f.2012.03.022
