Perilaku Temperatur Minyak Lumas Pada Kapal
Abstract
Lubrication is an important thing in ship machining operations because it becomes a protective layer to separate two surfaces that are in contact with each other with three phases of objects whose volume remains at a constant temperature and pressure. Lubrication serves to prevent friction between components so that it becomes smoother. If the engine is at a high temperature, the oil viscosity will tend to decrease. The more often the lubricant is used, the thing that happens is that the temperature of the lubricating oil varies. The purpose of this study is to describe the behavior of the lubrication temperature on the ship. The research uses quantitative methods by observing the temperature of the main engine along the way by looking at indicators and direct measurements on the main engine using a thermocouple. The results showed that the temperature behavior is very dependent on the age of the lubrication and the operation of the cooling system on the ship's machining system. This study concludes that the lubrication temperature behavior is very dynamic and the influencing factors include the age of the lubrication, the type of lubricant and the engine, as well as the cooling performance.
Downloads
References
Alirejo, M. S., Daging, I. K., & Preston, J. (2018). Kajian Penerapan Viskositas Minyak Pelumas Pada Mesin Penggerak Utama Kapal Perikanan di PT. Hasil Laut Sejati. Jurnal Kelautan Dan Perikanan, 1(1), 30–37.
American Bureau of Shipping. (2021). Marine Fuel Oil Advisory. ABS, 42.
CIMAC. (2004). Guidelines for Diesel Engines lubrication, Oil degradation. The International Council on Combustion Engines, 22, 66.
D. A. Taylor. (2003). Introduction to Marine Engineering. Elsevier Butterworth-Heinemann Linacre House, Jordan Hill.
Darmanto. (2011). Mengenal Pelumas Pada Mesin. Momentum, 7(1), 5–10.
Eriksson, M., & Ab, S. C. (2007). The oil temperature’s effects on engine oil degradation in trucks The oil temperature’s effects on engine oil degradation in trucks SE-100 44 STOCKHOLM The oil temperature’s effects on engine oil degradation in trucks. Master of Science Thesis Stockholm, Sweden.
Hadi, E. S., & Mulyadi. (2017). Pengaruh Jarak Tempuh terhadap Viskositas Oli pada Sepeda Motor Matic Tahun 2011. Jurnal Rekayasa Energi Manufaktur, 2(2), 63–68.
Hendrawan, A. (2020). Pengaruh Turbocharger terhadap Daya Mesin Induk KN. Prajapati. Majalah Ilmiah Gema Maritim, 22(1), 44–48. https://doi.org/10.37612/gema-maritim.v22i1.50
Hendrawan, A. (2022). Peran Incinerator Dalam Pencegahan Pencemaran Laut Di KM . Majalah Ilmiah Bahari Jogja (MIBJ), 20(1), 42–50.
Hendrawan, A., Ajun, R., Siswadi, & Supari. (2021). Penyebab Kerusakan Electro Motor Oil Max Pump pada Mesin Induk di KM . Dharma Kartika IX. Jurnal Saintara, 5(2), 28–35.
Hendrawan, A., Sasongko, A., & Dafa, M. (2021). Pengaruh Umur Pelumasan Terhadap Suhu Mesin Induk KM Logistik Nusantara 4. Jurnal Sains Teknologi Transportasi Maritim, 3(2), 1–9.
Knowles, M., & Baglee, D. (2012). Condition management of marine lube oil and the role of intelligent sensor systems in diagnostics. Journal of Physics: Conference Series, 364(1). https://doi.org/10.1088/1742-6596/364/1/012007
Massora, M., Kaparang, F. E., & Pangalila, F. P. T. (2014). Hubungan Jenis Pelumas dengan Suhu Mesin Induk KM Tuna Lestari 16. Jurnal Ilmu Dan Teknologi Perikanan Tangkap, 1(6), 191–196.
Purbaa, R., & Tarigan, K. (2020). Pengaruh Jenis Oli Terhadap Daya Dan Konsumsi Bahan Bakar Motor Kapasitas 150 cc. URNAL ILMIAH TEKNIK SIPIL, 9, 47–58.
Totten, G. (2006). HANDBOOK of LUBRICATION and TRIBOLOGY. In Taylor & Francis Group, LLC. https://doi.org/10.1201/9781420003840.ch22
Woodyard, D. (2004). Pounder’s Marine Diesel Engines and Gas Turbines. Elsevier Butterworth-Heinemann Linacre House, Jordan Hill, Oxford OX2 8DP.
