Analisis Konsumsi Bahan Bakar Kapal Niaga Berdasarkan American Society for Testing Materials the Institute of Petroleum (ASTM-IP)

Nafi Almuzani; Bambang Wahyudi; Imam Fachruddin

doi:10.46484/db.v1i1.181

Nafi Almuzani Sekolah Tinggi Ilmu Pelayaran, Jakarta
Bambang Wahyudi Sekolah Tinggi Ilmu Pelayaran Jakarta
Imam Fachruddin Sekolah Tinggi Ilmu Pelayaran Jakarta

DOI: https://doi.org/10.46484/db.v1i1.181

Keywords: Optimization, Inert Gas System, Cargo Handling, Crude Oil

Abstract

Vessel operational costs are dominated by fuel purchases. Furthermore, monitoring the consumption of fuel oil on the ship is not given enough attention, because the officers concentrate more on how the ship can move to its destination. The purpose of this study is to determine the correction that must be done as well as the impact caused if the consumption of fuel oil through the flowmeter on the ship is corrected using ASTM-IP. The subjects of this study were four vessels in the PT. S. I. Ship Management with specific graphity (SG) of 0.9601. From the results of the study show the output data flowmeter on the main engine must be multiplied by the factor for reducting the volume to 15o C in ASTM-IP so that it has an impact on the accuracy in reporting fuel consumption. As a result operational costs are reduced and the ship company can sell its services competitively

Downloads

Download data is not yet available.

References

ASTM–IP. (1965). American Society for Testing Material the Institute of Petroleum Tables. The Institute of Petroleum, hal. 29 dan 54

Bruegge, A. (2004). Specification of a 1100 TEU Container Vessels. Hamburg: VEGA REEDERI GMBH & CO KG, hal. 94

Baharuddin. (2016). Perancangan Simulasi Kontrol Otomatis Distribusi Bahan Bakar Tangki Harian pada KM. Madani Nusantara, Jurnal Riset dan Teknologi Kelautan (JRTK): Volume 14, Nomor 1, hal. 61-76.

KP. Teknik. (2007). Proposal untuk penggantian bahan bakar dari MDO ke MFO. Tidak dipublikasikan, hal. 25

MAN B & W. (2010). MAN B & W DIESEL-K90ME9-TII Project Guide - Electronically Controlled Two-Stroke Engines. Denmark: M. Diesel and Turbo, hal. 2 (7.04)

Simatupang, D. (2018). Optimalisasi Alat Pengabut Bahan bakar Pada Generator Untuk Kelancaran Pengoperasian MV. EGS. CREST. Meteor STIP Marunda, 11(2), 6-15.

Taher, M. U. (2018). Optimalisasi Pengoperasian Boiler Dalam Memproduksi Uap Untuk Menunjang Pengoperasian Kapal MV. SINAR KUTAI. Meteor STIP Marunda, 11(2), 16-21