Pelapisan Hydroxyapatite Pada Logam Titanium Material Sistem Gas Buang Mesin Diesel Generator

Lilik Budiyanto

doi:10.46484/db.v1i1.190

Lilik Budiyanto Universitas Maritim AMNI Semarang

DOI: https://doi.org/10.46484/db.v1i1.190

Keywords: thermal barrier, coating, hydroxyapatite, titanium

Abstract

Exhaust gas systems in diesel generators require heat-resistant materials. The use of titanium metal is designed for exhaust gas system materials. Material coating system for high temperature applications known as Thermal Barrier Coating (TBC) has been applied to diesel engine materials. TB has the ability to reduce temperature on the surface and protect thermal oxidation at high temperatures. This research discusses the coating of hydroxyapatite (HA) ceramic material on titanium metal which will be used as a flue gas system material with variations in coating temperature. The method used is testing the chemical composition of titanium metal, macro microscope testing of ceramic coatings and adhesion testing with variable temperature specimens 7000C, 8000C and 9000C.

Downloads

Download data is not yet available.

References

Dian Agustinawati, Suasmoro. (2014). Analisa XRD dan SEM pada Lapisan Tipis TiC Setelah Uji Oksidasi, Jurnal Teknik vol. 3,No. 2.

Ezugwu, E.O. & Wang, Z.M., (1997), “Titaniumalloys and their machinability-a review”, Journal of Materials Processing Technology, 262-274.

Hariyati P, Sulistijono, Lukman N, Rindang F, Cartha K,(2010) Studi Antar Muka Top Coat Dan Bond Coat Pada Rekayasa Pelapisan Alumina Sebagai Lapisan Perintang Panas Untuk Aplikasi Temperatur Tinggi, Mekanika jurnal, Volume 9 .

Jusak Johan Handoyo. (2014). Teknik Kelistrikan Kapal Ahli Teknik Tingkat III.

Putri Arini, Ahmad Fadli, Amun Amri. (2016). Coating Hidroksiapatit Pada Logam Stainless Steel 316L Menggunakan Metode DIP Coating Dengan Variabel Temperatur Sintering Dan Komposisi Air Dalam Suspensi, Volume 3.

Sudarmono Rizki Yulianto, Edi Widodo. (2013). Analisa Pengaruh Variasi Temperatur Proses Pelapisan Nikel Khrom Terhadap kualitas ketebalan Dan Kekerasan Pada Baja ST 40, Proceding Call For Paper-SNFT UMSIDA, 145-149.

Vishu Sankar. (2014). Thermal Barrier Coating Material Selection, Method Of Prepare And A-Review. Internatioanl Journal Mech Eng; Vol 3, No 2,510-517.

Yoga Arob Wicaksono, Warju. (2014). Pengaruh Catalytic Converter TitaniumDioksida Terhadap Emisi Gas Buang Sepeda Motor Honda Supra X 125 Volume 03 Nomor 02, 197-206.